Genesis 25′ x 50′ CNC Robotic Welding Cell / System

General Info:

Year: 2009
Loading Fee: Rigging Required

Specifications:

X Travel Distance: 25′
Y Travel Distance: 50′
Z Travel Distance: 23″
Gantry Clearance Height: 17.5′
X, Y, Z Max Travel Speeds: 945 IPM
Acceleration Weight: 945 IPM
Voltage: 480V/3PH/60Hz
Full Load Amps: 83.91
KVA: 69.13

Equipped With:

Fanuc ARC Mate100 iC Robot Arm, 108″ x 144″ Genesis CNC Adjustable Length Lathe, Gudel Servo Controlled Gantry System, Lincoln Power Wave 455M/STT Welder and Wire Feeder, Hand Held Controller, GE Fanuc Controller, Light Curtains, Servo Robot 700101310 Laser Tracker System

Additional Info:

This unit is in excellent condition with low use. It is under power and can be demoed upon request. One of the gantry tracks was installed with a spacer to extend the leg so the track could be installed under ground allowing for forklift entry on the side. The spacer can be removed shortening the leg to match the height of the other gantry leg. The unit was designed with three light curtain zones but now can only be run as one zone. None of the fixtures, welding table or floor strips in the pictures are included in the sale of the unit. Engineered drawings can be seen by copying and pasting this link https://www.dropbox.com/sh/dmx8yu1embc1mff/AABxT5x1TOPnXc3bbFpNpHSra?dl=0&m=. Additional high resolution pictures can be seen here https://www.dropbox.com/sh/1ylzju14zvrak24/AADADAfg7Wf4sJcg9s24shRPa?dl=0.

This machine is being sold from our client’s facility and is being sold AS-IS (Not covered under the MDNA Return Privilege). We always recommend machine be inspected in person to verify condition.